What is a reference number on a patent drawing?
A reference number, also called a reference numeral or reference character, identifies a part shown in a patent figure and connects that visual part to the written description. A callout combines the numeral with the leader line that points to the part.
Reference numerals are not figure numbers. 100 might identify a housing, while FIG. 1 identifies the drawing view that contains it.
A practical reference-number workflow
- Prepare a reference list. Start with the numerals and the parts they identify. In Annotra, a two-column CSV, XLSX, or XLS file can be imported instead of retyped.
- Open the complete figure set. Working in one multi-page project makes repeated parts easier to check.
- Place the numeral. Keep it legible and separate from drawing lines, hatching, and shading.
- Add the leader line. Point clearly to the intended part and choose an endpoint that remains readable at the final PDF scale.
- Reuse the same numeral. When the same part appears in another view, duplicate or re-place the same reference number rather than assigning a new one.
- Review before export. Check placement, text size, figure labels, page order, and every repeated numeral in the complete PDF.
Worked example: number the same assembly in two figures
Keep a housing numbered 100 in both views, even when its position changes. Use 110 for its cover and 120 for its fastener wherever those parts appear. Figure labels identify the views; reference numerals identify the parts within those views.
This illustrative exercise uses a fictional three-part assembly. It is a practice workflow, not a customer case study or a measured performance result.
1. Prepare one reference list for both views
Start with a two-page PDF: FIG. 1 shows the assembled housing and cover; FIG. 2 shows an exploded view with the fastener visible. Use this single list rather than creating a new numbering sequence for the second page.
| Numeral | Part | FIG. 1 | FIG. 2 |
|---|---|---|---|
| 100 | Housing | Place | Reuse 100 |
| 110 | Cover | Place | Reuse 110 |
| 120 | Fastener | Not visible; omit | Place |
For import, put only the numeral and part description in your two-column reference file. The figure columns above are a review aid, not additional import fields.
2. Import the list and place the first callouts
Import the PDF into Annotra, then import your CSV reference list. On the first page, place 100 for the housing and 110 for the cover. Position each leader endpoint on its intended part and keep the numeral clear of drawing lines.
3. Reuse the numbers on the second figure
Duplicate callout 100 to the second page and move its endpoint to the housing in the exploded view. Repeat for 110, then place 120 on the visible fastener. A duplicated callout keeps its number; you still need to check its placement in the new view.
Common mistake: assigning 130 to the housing in FIG. 2 just because it appears on a new page. In this example, it is still the same housing, so it remains 100. Do not place 120 on FIG. 1 when the fastener is not shown.
4. Check the exported result against the list
Export the annotated PDF and open it separately from the editor. For this exercise, confirm that FIG. 1 contains 100 and 110, and FIG. 2 contains 100, 110, and 120. Check each leader endpoint, the figure labels, and text legibility at the intended page size.
The expected result is a consistent set of references across two views. Annotra helps place and reuse callouts; the person preparing the drawings must confirm that the numbers match the intended parts and written description.
See the duplication controls or follow the complete Annotra workflow.
How do you keep reference numerals consistent across multiple figures?
Use a single source list, track where each numeral appears, and reuse the original numeral whenever the same part is shown again. In Annotra, a callout can be duplicated to one page or all other pages and keeps its number. Imported reference-list rows also report where a number has been placed.
This is the key difference between merely adding text to a PDF and managing a patent figure set as one project: the reference system has to stay coherent across sheets, not just look correct on one page.
What should you check before exporting?
- Every numeral identifies the intended part.
- The same part uses the same numeral in every view.
- Leader lines are unambiguous and do not obscure the drawing.
- Reference text remains legible at the final page size.
- Figure numbers, page order, margins, and orientation are correct.
- The flattened final PDF is reviewed separately from the editable working file.
Primary USPTO sources
For U.S. filings, consult the current USPTO rules and guidance rather than relying on software alone. The USPTO's current MPEP guidance says reference characters should be plain and legible, should not interfere with comprehension, and should be used consistently when the same part appears in more than one view.
